Panel-Mount Connectors - Twist-Lock Power
- SKU:
- PANEL-MOUNT-POWERCON
- Maximum Purchase:
- 25 units
The powerCON is a locking 3 conductor equipment AC connector with contacts for line, neutral and pre-mating ground contact. It replaces appliance couplers wherever a very rugged solution in combination with a locking device is needed in order to guarantee a safe power connection.
Attention: The powerCON is a connector without breaking capacity, i.e. the powerCON should not be connected or disconnected under load or live!
Product Descriptions
Click image for more info at Neutrik.com
NAC3MPA-1
Neutrik chassis connector, power-in, 3/16'' flat tab terminals, blue.
The powerCON is a locking 3 conductor equipment AC connector with contacts for line, neutral and pre-mating ground contact. It replaces appliance couplers wherever a very rugged solution in combination with a locking device is needed in order to guarantee a safe power connection.
Attention: The powerCON is a connector without breaking capacity, i.e. the powerCON should not be connected or disconnected under load or live!
NAC3MPB-1
Neutrik chassis connector, power-out, 3/16'' flat tab terminals, grey.
The powerCON is a locking 3 conductor equipment AC connector with contacts for line, neutral and pre-mating ground contact. It replaces appliance couplers wherever a very rugged solution in combination with a locking device is needed in order to guarantee a safe power connection.
Attention: The powerCON is a connector without breaking capacity, i.e. the powerCON should not be connected or disconnected under load or live!
SAC3MPA
Seetronic panel-mount connector, power-in, 3/16" flat tab terminals.
Designed to panel mount into a standard D-series punch-out.
Features:
Copper, silver contacts
Zinc die-cast button
Polyamide case
UL recognized components
Safety requirements: IEC61984
Flammability class: UL94 V-0
Dimensions (WxHxD): 26 x 31 x 37.3 mm
SAC3MPB
Seetronic panel-mount connector, power-out, 3/16" flat tab terminals.
Designed to mount into a standard D-series punch-out.
Features:
Copper, silver contacts
Zinc die-cast button
Polyamide case
UL recognized components
Safety requirements: IEC61984
Flammability class: UL94 V-0
Dimensions (WxHxD): 26 x 31 x 37.3 mm
Mounting Instructions
The standard knockout for a D-series product is approximately 0.840" or 21.3mm. 27/32" will also work.
Since the method of mounting a panel-mount D-series connector varies, the mounting screws or rivets are not included with this connector. Screws used for chassis connectors depend on panel material and panel thickness. We suggest the following:
- METAL PANEL - (with drilled hole that is not threaded) - Flat head thread forming screws, Pozidriv (recommended) or Phillips, M3 x length (drilled hole ~ 3.1 mm)
- METAL PANEL - (with M3 threaded mounting hole) Flat head metric machine screws, Pozidriv (recommended) or Phillips, M3 x length
- RIVETS - It is possible to use any aluminum 1/8'' or 3.2 mm 90° countersunk blind rivet. We suggest drilling a hole diameter of 3.3mm for the panel. It is possible to use pneumatic, electrical or hand riveting tools
nac3mpa nac3mpb nac3mpa-1 nac3mpb-1 sac3mpa sac3mpb powercon