Seetronic SAC3MPB Power Connector Gray Panel Mount

Availability: In stock

Units in stock: 250

Price: $3.49 MAP: $3.49 MSRP: $4.99
OR

Quick Overview

The Seetronic Power Connectors are UL listed.

Designed to panel mount into a standard D-series punch-out. The standard knockout for a D-series product is approximately 0.840" or 21.3mm. 27/32" will also work.

Since the method of mounting a panel-mount D-series connector varies, the mounting screws or rivets are not included with this connector.

Screws used for chassis connectors depend on panel material and panel thickness. We suggest the following:

  • METAL PANEL - (with drilled hole that is not threaded) - Flat head thread forming screws, Pozidriv (recommended) or Phillips, M3 x length (drilled hole ~ 3.1 mm)
  • METAL PANEL - (with M3 threaded mounting hole) Flat head metric machine screws, Pozidriv (recommended) or Phillips, M3 x length
  • RIVETS -  It is possible to use any aluminum 1/8'' or 3.2 mm 90° countersunk blind rivet. We suggest drilling a hole diameter of 3.3mm for the panel. It is possible to use pneumatic, electrical or hand riveting tools.

Seetronic SAC3MPB Power Connector Gray Panel Mount

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

Details

The Seetronic Power Connectors are UL listed.

Designed to panel mount into a standard D-series punch-out. The standard knockout for a D-series product is approximately 0.840" or 21.3mm. 27/32" will also work.

Since the method of mounting a panel-mount D-series connector varies, the mounting screws or rivets are not included with this connector.

Screws used for chassis connectors depend on panel material and panel thickness. We suggest the following:

  • METAL PANEL - (with drilled hole that is not threaded) - Flat head thread forming screws, Pozidriv (recommended) or Phillips, M3 x length (drilled hole ~ 3.1 mm)
  • METAL PANEL - (with M3 threaded mounting hole) Flat head metric machine screws, Pozidriv (recommended) or Phillips, M3 x length
  • RIVETS -  It is possible to use any aluminum 1/8'' or 3.2 mm 90° countersunk blind rivet. We suggest drilling a hole diameter of 3.3mm for the panel. It is possible to use pneumatic, electrical or hand riveting tools.

Additional Information

SKU SAC3MPB
Video No
UPC 759681019176
Data Sheet No
Weight 0.2000
MAP Price $3.49

Magento Flexible Products Widget by EMThemes Magento Themes & Magento Templates