Six circuits, sealed for life.
An overmolded 19-pin Socapex extension that nothing can work loose. Built on Phase 3 cores, molded onto 12/14 SEOOW, and backed for ten years.
- Overmolded, two-stage
- 10-year warranty
- Hipot tested, record kept
- Custom labeling available

A standard Socapex extension is built to be opened up and serviced. This one is built so it never needs to be. The connector cores are locked in a first molding, then a second shot adds the strain relief and grip, and the rubberized TPE overmold fuses with the TPE jacket into one continuous piece instead of a clamp.
Six 20 A circuits on one cable, the same 19-pin layout every lighting rig already uses, and a jacket that stays flexible when the truck is cold.
- Touring lighting
- Rental stock
- Festivals and outdoor
- Dimmer and distro runs
- 6 × 20 Acircuits at 120 V, 12 AWG
- 10 yearswarranty on the overmold
- −50 °Cstill flexible, TPE jacket
Why overmolded
Like bonds to like
The TPE overmold fuses with the 12/14 SEOOW's TPE jacket during molding. One continuous piece, not a backshell clamping a cord.
Two-stage molding
Stage one locks every pin and joint in place. Stage two adds the strain relief and the grip. Nothing inside can work loose.
Phase 3 cores
The 19-pin cores are Phase 3, the same connectors our standard SOCO line is built on, so the pinout and the mating are what your rig expects.
Easier to live with
Flexible down to −50 °C, no rubber smell, and it wipes clean. Trunks coil fast and look sharp on the second year as on the first.

Built for the long haul
Touring and rental cable gets dragged, coiled wet, and stepped on. The overmold means there is no clamp to loosen, no backshell to crack, and no seam for water to find.
Every assembly is hipot tested, and the test record is kept per unit.

Code-ready on any stage
SEOOW is listed extra-hard usage cord, 600 V, the class NEC 520.68 asks for on portable stage equipment, and what 525.20 and 590.4 ask for at festivals and temporary power. Six 20 A circuits per cable is supported by Table 520.44(C)(3) with its adjustment factors.
Your name on the cable
Custom labeling is what makes a cable yours. Tell us what the label should say and we print it and put it on the cable, so the cable that walks off at load-out walks back.
Free on this cable. Choose Include Custom Labeling under Labeling Options.
Specifications
| Category | 19-pin Socapex extension, male to female, overmolded |
|---|---|
| Connector A | 19-pin Socapex male, Phase 3 core, two-stage overmold |
| Connector B | 19-pin Socapex female, Phase 3 core, two-stage overmold |
| Conductors | 14 × 12 AWG: 6 hot, 6 neutral, 2 ground |
| Jacket | 12/14 SEOOW, TPE, extra-hard usage (NEC Table 400.4) |
| Voltage rating | 600 V |
| Current rating | 6 circuits × 20 A at 120 V |
| Temperature range | −50 °C to 105 °C |
| Cord standards | UL 62; CSA C22.2 No. 49; CSA FT4; RoHS; REACH |
| Lengths | 10, 15, 25, 50, 75, 100, 150 ft |
| Warranty | 10 years |
| Labeling | Custom labeling available at checkout |
| Built in | USA (cable and assembly) |
Need a serviceable version for in-house repair? The standard SOCO-MF on SOOW is the same six circuits with a backshell you can open. See the standard SOCO-MF →
Goes with it
Real people, real answers
Questions about a length, a pinout or whether it fits your rig? Call or chat with us. You will get a person who builds this stuff, not a script.
Your Cabling, Perfected.
Need a length we don't list, a breakout or break-in to match, or your crew's name on the label? Tell us what the rig needs and we'll build it.



US Dollars


