Elite Core CSA

Elite Core CSA Cables are made of high quality components at our headquarters in Conway, Arkansas by skilled technicians. Only the finest available materials and most effective techniques are used. Every detail - the cable construction, the connector choice, the shrink tube, the testing, and the packaging, are each carefully chosen to create the finest stage and touring antenna cable available.

Cable Construction

DESCRIPTION

ASTM Bare Copper Conductor
Foam PE Insulation
Bare Copper Braid Shield
PVC Jacket
Standard Spool Size: 1,000'

PARAMETERS

Conductors: 1
AWG Size: 16
Stranding: 19x29
Insulation with Tape Barrier: Gas Injected PE
Insulation Nom. O.D.: .155"
Shield Type and % Coverage: Bare Copper Braid, 95%
Jacket Type: PVC
Nom. O.D.: .242"

Connectors

Amphenol RF® 50 Ohm BNC Connectors

MPN: 112533-WP

Technical

ELECTRICAL CHARACTERISTICS

Nominal Capacitance Conductor to Shield: 25pf per foot
Vel. of Prop.: 82%
Nom. Imp.: 50 ohms
Nom. D.C.R. (Resistance) at 68 degrees F: 4.3 ohms per 1,000'

SHOP TALK:

The technicians in the Elite Core Custom Shop have spent many years refining their techniques for consistent, stable, and reliable soldering. The finest solders and flux from Kester are exclusively used. Only the highest quality Weller soldering stations are employed. The finest 2:1 polyolefin shrink tube is used to protect the solder connections and finish out the cable. Once it’s finally assembled, each cable is hand-tested, then over/under coiled and finished off with a Bongo-Tie before being sealed into a plain clear poly bag for safe travel.